Видео

No intercooler? My intercooler pipes kinda block from the side bolt

It’s also used to bend the wire into a coil to shim out the plug if the box isn’t flush with the drywall

Haisstronica is a popular ratcheting tension crimper line on Amazon . Although of Chinese manufacturer they are quality and rebrands others . An adjusting sprocket increase or decrease crimp tension . Six different die sets are available .

I purchased a 184 at an auction recently but I haven't been able to see it. It's at my uncles house and I'm excited to get it next week. I don't think mine has a creeper gear either and I don't know about PS, I'm really interested in both of those. It doesn't have a 3pt but I have other tractors that are more capable that have a 3pt so I'll probably only put one on if I find the parts super cheap. I'll be looking thru your videos to see if you have others with your 184.

Yep. By far the best at breaking the whole operation of how the motor operates. Talk about helpful!!

Former A&P myself. The Harbor Freight version is beyond garbage. Broke immediately when 1st used.

Tractor supply sells a kit that has a vent plug, cap and flexible spout (old school !). Works like a charm no more spilled gas ! Cost me 12$ and change.

These hold up two years later ?

Great Design and engineering!

Also works great to tighten/loosen handles on a vice.

Ohhh i have one of these didnt know what it was

I don’t like Lowe’s because Jimmy Johnson drove for them but I do love every Toughbuilt tool I own. They are very well designed.

Great tutorial. I have a Kubota and I’d like a one level arm that sets rear brakes.

I hate those new spouts! Spill every time!

Well huh! Thanks for that tip pal.

They couldn't have made them since WWi as they were only developed for WWii !

And by the way Not electrician Cable splicer Tech 27 yeah😂 If you have grip and a penny cut it with some pain.

Snips yes scissors no🤣

I bought 2 of them a year ago, both pour spouts cracked around the threads when installed. Called the company They sent 2 more. Within a couple of months they too cracked. I ordered some on Amazon from a different company and they're fine. If you do get them, you can expect the caps won't last.

The Wera 6004 Jokers work in a similar manner. They don't give the range of adjustment that the "k nip x" do, but they are handier to use as they work as a ratcheting open end. I have a number of sizes of both and they have their uses, both are excellent at what they do.

The new plastic cans only last about 3 years before you have to replace it. Recently had the fire dept come around for an inspection and advised me not to keep the cans stored outside. He wanted me to store them inside my garage? What? Not going to happen since I do small metal work with grinding and welding. I bought some Vevor cans and they seem to want to bulge from the gas expansion sitting outside (even in the shade). Dispensing fluid is really good as it has an internal vent with no plastic anywhere. The can you show I like b'cuz of the recessed seam where-as the vevor has a protruded seam

Not sure how safety glasses will keep you from electric shock. Insulated gloves, yes. Safety glasses, not so much...

These are used to wire nuts and bolts on aircraft and high performance race cars to keep them from spinning themselves loose.

How is $60 for a gas can.. cheap? Pressing down on a little push mower plastic gas tank like that would break your mower gas tank.

It's a winner. 👍

If you use thicker gauge wire and some heat you can make a really cool poker for your bong with these

So slow you would never get anything done. Crap

I had one problem the hose is too short for a 5 gallon can to fill a generator.

You can put the other type in a vice to squeeze it, at least the one I have (Kincrome) can be used like that.

How well are the tips on the extraction lines secured? I would be afraid it would come off and then have a bigger problem.

💯

can u use the clamp as a probe to check outlets for voltage like a death stick does?

it's hard to buy small hose clamps that are any good any more.... all i can find is cheap china junk

These steel Jerry Cans cannot be purchased or shipped to California, unfortunately.

I got the same drink and it’s green too

great video. I have a question. I want to patch a 2"x2" on the middle of the door and don't want to weld it. For such a small piece I don't want to invest in expensive adhesive, the gun that goes with it and etc. what do you think If I use JB weld instead of the 3M bonding Adhesive?

Fantastic review. I didn't even know HF offered a scissor lift. The lift worked great and lifted very high. I really appreciate how you are forthcoming about the problems and and fixes you encountered. Overall a great value. The clearance issues are a real problem for me. I don't think HF offers 25% percent coupons anymore

Or hear me out... Power only cables.

Do you think that would work in a vehicle's gas tank?

Anything the EPA has authority over is an absolute goat fornication.

The spout s designed by feces brain bureaucrats, so that things won’t catch fire. Of course it. is an absolute piece of crap. You’ll leak more gas all over the place and have a bigger chance of catching a fire. Also, it will take forever to dispense the fuel ,and if you don’t leak and into flames., You will drop the damn thing because it weighs a ton. Dispensing half an ounce an hour,, It will take forever to get the gas from the can into your device and an accident is bound to occur. This is what happens when you let ignorant bureaucrats from the federal government redesign a perfectly good device into something that’s dangerous and won’t work.

Great video, I don’t have a use for a tractor but I want one anyway lol 👍😁

So is there a way to fix the unit in place along the track?

People says wht they want this kit is better than nothing most people carry nothing just like a first aid kit

The Palm Pinchers 3000

I need to hang my heavy bicycle in my garage. Buying this hoist is easy, but I need to get the hanger/trolley parts. Hopefully, I can find them. This video was helpful. Thanks.

Ours have the handle

Its not welding its brazing but yes they work

I like it! Great video!👍

I don't have a tractor but that was the best tutorial I have ever seen for anything. Thanks for the video.